Analysis of Advantages Alarms Wifi to GSM Alarms

So use less mobile phone today is to call by phone. We all want to have in our smartphone not only e-mail, bank accounts, the Chambers of our House the last is also have the alarm on an APP that also communicates with the central for free… or not?. There are many advantages of the alarms WiFi connection with the GSM alarms. In this document we are going to discuss some of them.

Analysis of Advantages Alarms Wifi to GSM Alarms

To summarize it in some way, the wireless alarms are directly connected to our router wirelessly, so it is not necessary to use a SIM card, the communication is done through the router and Internet. Why are more modern than the GSM home alarm systems and allow us greater advantages.

Although some models of wireless alarms have a slot to insert a GSM SIM, use comes mainly intended to use the central alarm as a phone hands-free and be able to communicate with the central. It is not mandatory to install a SIM card to communicate through the Internet network according to insurancejust.

Analysis of Advantages Alarms Wifi to GSM Alarms 3

Advantages alarm WiFi

  • It is not obligatory to use a SIM card:
    • We avoid maintenance costs to the operator of the GSM card. Both in the monthly maintenance fee notices to the alarm Center.
    • GSM coverage. You don’t need to worry about if we want to install the alarm in a place isolated without GSM coverage, since it connects to the Router.
  • In a same APP can handle both IP cameras, WiFi, and alarm outlets
  • Avoid making maintenance of the GSM line. Alarm GSM is suitable periodically check has one sufficient balance and the SIM card is operational.

Cheaper maintenance IP alarm

Transmit data over the Internet doesn’t have any cost front to transmit data via the GSM/SMS network. When sending data over the Internet we can use without fear of our alarm to arm, disarm, leave messages… And knowledge will not have any additional cost for this use.

More information. Greater control

To use the Internet not only user can communicate to arm / disarm remotely. But the alarm can also send information continuously on for example the battery level or pictures from a camera. To be able to send more information without further additional cost we can have more information in real time from our alarm.

Disadvantages of an alarm WiFi

Although almost all are advantages with WiFi alarms, we have to take into account the following points:

  • Impossibility of communication if cut light. If there is no power supply, and the Router cannot connect to the Internet, when the alarm detects an intruder it would not be possible to let us know via WiFi Router would be off
  • The price is somewhat high have to consider the difference not to pay any maintenance by the GSM line.
  • It is necessary to have a WiFi connection in the place where we want to install the alarm. I.e. we can not install it in a remote area or without our router WiFi signal.

You can see models of alarm WiFi and GSM are available in the specialized website of alarms from home no fees

In this document, you have more information about how work alarms without quotas.

Combining IP cameras with IP alarms

Integration via WiFi from IP cameras and IP alarm allows you to use both products from the same APP. Many customers want to use in a same APP all products without having to be changing of the mobile application.

In this way you can unify in a same APP full control of your home from anywhere via the Internet.

IP or wireless alarm systems provide many advantages over time will discover. If are interested in seeing models of IP alarms have you can consult our home alarm shop where you will find the most economic price. Or if you need to leave us a message you can do it from this blog.

Analysis of Advantages Alarms Wifi to GSM Alarms 2

Buy more detectors for wireless alarm systems

About wireless alarm kits G90Band AZ019, both models use encodings 2262 and 1527 at 433 Mhz. Any detector in these encodings such as doors, move, fire sensors, water,… officer correctly.

But with the same design of the sensors included in the initial kit you can add more sensors to be in the same design

Motion sensor alarm WiFi

You can use the G90-PIRsensor. It uses the same design of sensor included in the initial alarm.

Opening doors for WiFi alarm sensor

Model G90-DS is a design of detector opening doors with coding 1527. It has a hidden antenna and connection tamper warn us if someone tries to manipulate the sensor of door.

Armado-desarmado remotes alarm WiFi

If you are looking for the same design for commanders of armed you can acquire the G90-RC product

Armado-desarmado keypad for alarm WiFi

The G90-K07 keyboard is a wireless keyboard to activate or disarming the alarm.

It is a design in white color that as well as allowing to manage the keyboard using a key, you can use RFID cards for access control

How to remotely access alarm WiFi

Wireless alarms allow three ways to access remotely that are by this order, WiFi, GPRS and SMS.

This communication is done independently as this made the connection with the alarm detectors.

Please note the free WiFi network or GPRS have priority in the alarm earlier than SMS. The use of WiFi is usually free while GPRS or SMS has a small cost

On the WiFi connection, alarm connects wirelessly with the Router WiFi and from the previously configured PPP. This mode is the most common and used by default in wireless alarms.

Remote access to WiFi using GPRS alarm

By configuring GPRS alarm can be accessed in the APP by sending an SMS to the number of the SIM card installed in the alarm which provide the GPRS connection from your provider information.

When the WiFi connection is not available or does not have power panel will connect through GPRS. Return feed and retrieve the Wi-Fi station will continue to operate in WiFi mode normally.

Make the APN settings to alarm you must follow the following steps:

The symbol # must be at the beginning at the end of each line.

1111 is the default password.

Analysis of Advantages Alarms Wifi to GSM Alarms 1

P means set APN.

Parameters 1 to 13 are the APN settings

#1111Pparam1, param2, param3, param4, param6, param7, param8, param9, param10, param11, param12, param13, #

Param1: APN name

Param2: APN

Param3:

0: normal authentication

1: secure authentication

Param4: user name

Param5: password

Param6:

0: don’t use proxy

1: If you use proxy

Param7: proxy port

Param8: proxy address

Param9: identifying user proxy port

Param10: proxy password

Param11: DNS

Param12: 0

Movistar must use APN movistar.es user: movistar, password: movistar by sending a SMS to the control unit with the following information #1111Pmovistar.es, movistar, 0, movistar, movistar, 0, 0, #

To perform the configuration, you will receive an SMS alarm

If the configuration is correct: APN set Sucesso!

If it is not recognized: APN error set!

Notes:

  • Comrpueba the password is correct
  • Do not use special symbols or characters

Remote alarm via SMS WiFi access

By sending a SMS to the number of the SIM card installed in the central alarm you can do some functions from your mobile.

Disarm: #+ password usuario+D + #

Full Assembly: #+ password usuario+A1 + #

Armed home: #+ password usuario+A2 + #

Check status: #+ user + password #

If you need to modify the user’s password must Access the panel in option password and select password user.

For example: in alarm G90B user name is 1111

Send SMS “#1111D #” to disarm

Send SMS “#1111A1 #” for Assembly complete.

Envia SMS “#1111A2 #” to be reinforced at home.

  • Connect WiFi on panel through SMS message

Please note the panel must be connected to the mains. Only with battery, it is not possible to do this function

The contents of the SMS should be “#+ password usuario+W1 + name SSID, password + #”.

If the operation is performed correctly you will receive an SMS with content “Wi-Fi bonding success”.

For example:

The name of our network WiFi (SSID) is “apple” and the password “1234”

You should send SMS “#1111W1apple, 1234 #” to the number of the central alarm to activate WiFi and connect to this network.

Notes :

  1. Connect the alarm to the grid to allow Wi-Fi access
  2. User alarms wireless default password is 1111
  3. The default administrator password is 0000

The user can modify the alarm and the APP phone numbers.

G90B allows up to 6 phone number to which the plant in case of alarm call.

Gallery

O56 Android APP GSM Wireless Smart Home Security Alarm …

O56 Android APP GSM Wireless Smart Home Security Alarm ...

Source: www.ebay.com

T78 IOS/Android APP GSM Wireless & Wired DIY Home Security …

T78 IOS/Android APP GSM Wireless & Wired DIY Home Security ...

Source: www.ebay.com.au

DIY Home Security Now Reviews

DIY Home Security Now Reviews

Source: diyhomesecuritynow.com

Data loggers MSR – dataloggers acceleration, vibration …

Data loggers MSR – dataloggers acceleration, vibration ...

Source: www.msr.ch

Wireless gas leakage detector with device control

Wireless gas leakage detector with device control

Source: www.slideshare.net

K80 iOS Android App GSM Wireless Home Security Alarm …

K80 iOS Android App GSM Wireless Home Security Alarm ...

Source: ebay.com

Functions System Development Life Cycle

Functions System Development Life Cycle

Source: slideplayer.com

J25 Quad-4-Bands GSM PSTN Wireless Home Security Alarm …

J25 Quad-4-Bands GSM PSTN Wireless Home Security Alarm ...

Source: www.ebay.com

IOT Based LPG/CNG Gas Leakage Detection & Alert Using …

IOT Based LPG/CNG Gas Leakage Detection & Alert Using ...

Source: www.hackanons.com

Wireless alarm kit Blaupunkt Q3200 from Conrad.com

Wireless alarm kit Blaupunkt Q3200 from Conrad.com

Source: www.conrad.com

A06 PSTN GSM Quad 4-Bands 101 Zones Wireless Home Security …

A06 PSTN GSM Quad 4-Bands 101 Zones Wireless Home Security ...

Source: www.ebay.com

home security automation system – 28 images

home security automation system - 28 images

Source: deliverytohome.com

F63 IOS/Android APP SMS GSM PSTN Wireless DIY Home …

F63 IOS/Android APP SMS GSM PSTN Wireless DIY Home ...

Source: www.ebay.com

R56 Quad Bands GSM Wireless Wired Home Security Alarm …

R56 Quad Bands GSM Wireless Wired Home Security Alarm ...

Source: www.ebay.com.au

GF-08 GSM MMS Video Photo Transmit Camera GPS Tracker …

GF-08 GSM MMS Video Photo Transmit Camera GPS Tracker ...

Source: www.accenhk.com

Buy KERUI 5800G LCD Wireless Mobile Call GSM+PSTN Dual …

Buy KERUI 5800G LCD Wireless Mobile Call GSM+PSTN Dual ...

Source: www.ezgiz.com

GSM/M2M Gateway mit LTE/UMTS vom Hersteller » MC Technologies

GSM/M2M Gateway mit LTE/UMTS vom Hersteller » MC Technologies

Source: www.mc-technologies.net

wireless security control system and sensor network for …

wireless security control system and sensor network for ...

Source: www.slideshare.net

Alarm Systems & 24 hour Monitoring

Alarm Systems & 24 hour Monitoring

Source: www.cyprushomeservices.com

K61 Android APP Quad-Bands GSM Wireless PIR Home Security …

K61 Android APP Quad-Bands GSM Wireless PIR Home Security ...

Source: www.ebay.com